We use cookies to deliver the best possible user experience and to collect anonymous statistical data about our web traffic. Click "Accept" if you agree or click "Manage" to learn more and customize cookies. You can modify your selection later.
Your browser is very old and it is not supported.
This website uses modern web design practices to deliver the best possible user experience. While some basic functionality is still available for your browser, please consider installing a modern browser such as Chrome or Firefox to properly view this website.
This website uses modern web design practices to deliver the best possible user experience. While some basic functionality is still available for your browser, please consider installing a modern browser such as Chrome or Firefox to properly view this website.
Eurocode 2 EN1992: Design of Concrete Structures
- Summary:
- Calculations for Eurocode 2: Concrete design properties, creep coefficient & shrinkage strain, nominal concrete cover, anchorage & lap length
-
EN1992-1-1: General rules & rules for buildings
-
Materials
-
Table of concrete design properties
- Description:
- Design aid - Table of concrete design properties including strength properties (fck, fcd, fctm, fctd) elastic deformation properties (Ecm), minimum longitudinal reinforcement against brittle failure, and minimum shear reinforcement
- According to:
- EN 1992-1-1:2004+AC2:2010 Sections 3.1.2, 3.1.3, 9.2.1.1(1)
- Added on:
- 23 February 2017
-
Concrete creep coefficient & shrinkage strain
- Description:
- Calculation of concrete creep coefficient and shrinkage strain. The final value at infinite time is calculated as well as the development curves as a function of time
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 3.1.4 & Annex B
- Added on:
- 23 February 2017
-
-
Durability
-
Concrete nominal cover and minimum concrete class for durability (reinforcement bars and prestressing tendons)
- Description:
- Calculation of required nominal concrete cover cnom for reinforcement steel and prestressing steel
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 4.4, Annex E
- Added on:
- 17 May 2017
-
-
SLS Design - Stress Limitation
-
SLS design of circular (or tubular) reinforced concrete cross-section for stress limitation
- Description:
- SLS design of circular or tubular reinforced concrete cross-section for stress limitation (calculation of required reinforcement for given bending moment / axial force, maximum moment resistance for given axial force, or complete M-N interaction diagram for given reinforcement layout)
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 7.2
- Added on:
- 10 January 2020
-
SLS design of rectangular reinforced concrete cross-section for stress limitation
- Description:
- SLS design of rectangular reinforced concrete cross-section for stress limitation (calculation of required reinforcement for given bending moment / axial force, maximum moment resistance for given axial force, or complete M-N interaction diagram for given reinforcement layout)
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 7.2
- Added on:
- 11 April 2021
-
SLS design of I-shaped, T-shaped, and box-shaped reinforced concrete cross-section for stress limitation
- Description:
- SLS design of I-shaped, T-shaped, and box-shaped reinforced concrete cross-section for stress limitation (calculation of required reinforcement for given bending moment / axial force, maximum moment resistance for given axial force, or complete M-N interaction diagram for given reinforcement layout)
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 7.2
- Added on:
- 13 August 2021
-
-
SLS Design - Minimum reinforcement
-
Minimum reinforcement to control cracking - Rectangular cross-sections or webs of profiled sections (box-shaped, I-shaped)
- Description:
- Minimum reinforcement to control cracking of reinforced concrete - Rectangular cross-sections or webs of profiled cross-sections
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 7.3.2
- Added on:
- 11 December 2023
-
Minimum reinforcement for crack control of flanges of profiled sections (box-shaped, I-shaped)
- Description:
- Minimum reinforcement for crack control of flanges of profiled reinforced concrete cross-sections
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 7.3.2
- Added on:
- 21 December 2023
-
-
SLS Design - Crack Control
-
SLS design of circular or tubular reinforced concrete cross-section for crack control
- Description:
- SLS design of circular or tubular reinforced concrete cross-section for crack control (calculation of required reinforcement for given bending moment / axial force, direct calculation of crack width)
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 7.3.4
- Added on:
- 26 October 2023
-
SLS design of rectangular reinforced concrete cross-section for crack control
- Description:
- SLS design of rectangular reinforced concrete cross-section for crack control (calculation of required reinforcement for given bending moment / axial force, direct calculation of crack width)
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 7.3.4
- Added on:
- 14 September 2023
-
SLS design of I-shaped, T-shaped, and box-shaped reinforced concrete cross-section for crack control
- Description:
- SLS design of I-shaped, T-shaped, and box-shaped reinforced concrete cross-section for crack control (calculation of required reinforcement for given bending moment / axial force, direct calculation of crack width)
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 7.3.4
- Added on:
- 22 October 2023
-
-
ULS Design for Bending & Axial Force
-
ULS design of circular (or tubular) reinforced concrete cross-section for bending and axial force
- Description:
- ULS design of circular or tubular reinforced concrete cross-section for bending and axial force (calculation of required reinforcement for given bending moment / axial force, maximum moment resistance MRd for given axial force, or complete M-N interaction diagram for given reinforcement layout)
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 6.1
- Added on:
- 10 January 2020
-
ULS design of rectangular reinforced concrete cross-section for bending and axial force
- Description:
- ULS design of rectangular reinforced concrete cross-section for bending and axial force (calculation of required reinforcement for given bending moment / axial force, maximum moment resistance MRd for given axial force, or complete M-N interaction diagram for given reinforcement layout)
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 6.1
- Added on:
- 11 April 2021
-
ULS design of I-shaped, T-shaped, and box-shaped reinforced concrete cross-section for bending and axial force
- Description:
- ULS design of I-shaped, T-shaped, and box-shaped reinforced concrete cross-section for bending and axial force (calculation of required reinforcement for given bending moment / axial force, maximum moment resistance MRd for given axial force, or complete M-N interaction diagram for given reinforcement layout)
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 6.1
- Added on:
- 13 August 2021
-
-
Shear Design
-
Shear design of concrete cross-section (rectangular, T-beam, I-beam, box-shaped)
- Description:
- Calculation of shear reinforcement and verification of concrete strength for general concrete cross-section (rectangular, T-beam, I-beam, box-shaped)
- According to:
- EN 1992-1-1:2004+AC2:2010 Sections 6.2.1, 6.2.2, 6.2.3
- Added on:
- 25 April 2022
-
Design of shear connection at the interface between concrete cast at different times
- Description:
- Calculation of required shear connection reinforcement and verification of concrete strength at the interface between concrete cast at different times
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 6.2.5
- Added on:
- 10 September 2019
-
-
Punching
-
Punching shear design for internal column with circular cross-section (slab support or foundation base)
- Description:
- Calculation of punching shear reinforcement and verification of concrete strength for slab support or foundation base of circular internal column
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 6.4
- Added on:
- 29 March 2024
-
Punching shear design for internal column with rectangular cross-section (slab support or foundation base)
- Description:
- Calculation of punching shear reinforcement and verification of concrete strength for slab support or foundation base of rectangular internal column
- According to:
- EN 1992-1-1:2004+AC2:2010 Section 6.4
- Added on:
- 29 March 2024
-
-
Detailing
-
Table of reinforcement anchorage length and lap length
- Description:
- Design aid - Table of reinforcement anchorage length lbd & lap length l0 and associated detailing rules
- According to:
- EN 1992-1-1:2004+AC2:2010 Sections 8.4 and 8.7
- Added on:
- 20 October 2018
-
Table of reinforcement area and weight for distributed reinforcement bars and individual reinforcement bars
- Description:
- Design aid - Table of reinforcement area and weight for distributed reinforcement bars (in cm2/m, mm2/m or kg/m2) and individual reinforcement bars (in cm2, mm2, or kg/m)
- According to:
- -
- Added on:
- 21 October 2018
-
-